Have you ever finished up applying too quite a few coats of paints to wooden, only to have stains bleed through and damage your finish? Browse Jenn Largesse’s recommended actions for portray bare wood.
Methods for Painting Bare Wood
Step 1: Sand the Surface
It may well seem pointless to sand bare wood prior to painting, but stock lumber is typically coated in a glaze to assist protect it.
Taking away that coating will help the paint adhere. In addition, sanding opens the grain of the wooden, which can also aid with adhesion. This Outdated Residence Painter Mauro Henrique indicates making use of 150 grit sandpaper and then vacuuming and wiping the area cleanse.
Phase 2: Seal the Knots
I get the job done with a lot of pine and nothing at all is worse than viewing the stain of a knot bleed by a fresh coat of white paint. No subject how several coats you utilize, knots will at some point wreck your end, so seal them with a primer.
I prefer applying a spray primer that offers me the added benefits of sealing with an oil-based mostly merchandise devoid of the cleanup. The oil-based spray can be a merchandise like Kilz, which features a very low-odor spray solution, or shellac which is a preferred of Mauro since of how nicely it seals and how immediately it dries.
Move 3: Sleek the Surface area
In advance of you get to for a “paint and primer in one”, know that a focused primer typically has a higher focus of solids, which will better fill the grain for a smoother topcoat.
And remember that bare wooden enjoys to soak up paint, so it is ordinary for the initially coat or two to seem relatively uneven.
At the time dry, flippantly sand the surface area in between coats to knock down the grain, which raises from the moisture.
Step 4: Consider Tinted Primer
A brightly coloured topcoat painted above primer (vs . bare wooden) will obtain its final hue with less coats. Similarly, a darkish coloration painted over a personalized-tinted primer will access its darker tone with fewer coats.
Mauro suggests only tinting primer up to 50% to retain the toughness of the primer.
Action 5: Decide on the Right Base for your Color
When it’s time to paint, as with any undertaking, your paint qualified ought to be capable to endorse the appropriate base for your paint color prior to tinting. This will give your coloration the basis it requires to attain its hue.